January 2024 - CTC-3 is broken. The safety system display in the cab does not refresh unless you change to an external camera then return to the cab. The only way to drive this now is by having the full HUD on to see the ATC speed display on the speedo panel.
A forum post mentioned pressing the 1 key refreshes cab view if you want to try that. https://forums.dovetailgames.com/threads/ctc-3-safety-system-speed-and-signals-not-updating.77502/
- Very sensitive brakes - except if you enter platform above 35mph!
- From 60mph, apply minimum brake at 0.6 miles.
- That will bring you to platform at about 35mph. Apply 30% brakes until about 15mph, then release and minimum brakes as required.
- Gen field on )
- Engine run on ) in the cabinet above driver's window
- EP brake on )
- Reverser to neutral
- Head lights on
- Brake cut-off to passenger
- Switch on safety systems in cabinet in passenger compartment behind driver.
- Brakes to service
- Throttle to idle
- Acknowledge any alarms
- Brakes to release
- Wait for brake pipe to recharge
- Drive off
If the brake hiss is driving you crazy, turn off the EP switch - the one on the right - in the switch cabinet above the windscreen.